Industrial Head Protection User Information Guide

Hard Hat Inspection, Maintenance and Precautions
The hard hat is one of the most important pieces of equipment worn in the industrial workplace. A conventional hard hat consists of two components – the shell and the suspension – which work together as a system. Both components require periodic inspection and maintenance.

Hard Hat Shell
Thermoplastics (polyethylene, polycarbonate and others) and thermoset materials (fiberglass and phenolic-impregnated textiles) are commonly used to mold the shells of industrial hard hats. These materials have proven to be durable, reliable and lightweight while providing effective protection. Given the proper care and normal workplace conditions, a hard hat has a reasonable service life.

Inspection
The shell should be inspected routinely for dents, cracks, nicks, gouges and any damage due to impact, penetration, abrasions, rough treatment or wear that might reduce the degree of protection originally provided. Any hard hat that shows signs of worn or damaged parts should be removed from service immediately and replaced. Users who work in environments with high degrees of exposure to sunlight, heat, cold or chemicals should replace their hard hats more frequently than workers in other environments.

Hard Hat Suspension
The hard hat suspension system is just as important as the shell. Its main purpose is to help absorb the shock of an impact and it must be in good condition at all times. Inspection As with the shell, the suspension must also be inspected and replaced periodically. Over a period of time, the suspension will become worn and may become damaged. Suspensions should be inspected closely for cracks, frayed or cut crown straps, torn headband or size adjustment slots, loss of pliability or other signs of wear. It is recommended to replace the entire suspension system every 12 months.A hard hat should be replaced immediately at the first sign of any of deteriorating conditions. For more information about maintenance, field test information, and program replacement guidelines, visit: http://www.bullard.com/V3/resources/downloads/head_face_dwnlds.php#classic.

Hard Hats, Classic Style, Full Brim and Regular Brim with Ratcheting Suspension           

The Bullard Classic is all about comfort, without sacrificing safety. Featuring a comfortable six-point suspension, the Classic Series exceeds ANSI Z89.2003, Type 1, Class E requirements. Available in full-brim and cap styles with a wider profile to help protect against sun exposure, rain, snow and dust. Your logo can be applied in any of eight different locations. Easy to adjust Flex-Gear® ratchet sizing or standard suspensions available. Accessory slots accept a wide variety of attachments. Features also include: 6-point suspension, Pillowed brow pad, 1” wide seamless nylon crown straps, front and rear vertical height adjustments. For more product info, see:
http://www.bullard.com/V3/products/head_face/Head_Protection/classic/

Bullard Bump Caps (MKV2 Style)

The Bullard MK2V Bump Cap provides bump and scrape protection for a variety of industries including food/beverage processing, auto repair, utility meter reading, pest control, and fruit harvesting. Unlike competitive products, this cap accomodates a faceshield bracket and visor. Not intended for use where ANSI approved head protection is required. For more product info, see:
http://www.bullard.com/V3/products/head_face/head_protection/bump_cap/

Face Shield with Headgear

The Woodsman Forestry System features: Gladiator® six-point ratchet hard hat with Reflex™ suspension system, extra low padded nape strap for ultra-secure fit, full feature clip on earmuffs with stand-off and storage positions plus tension adjust. All cap-mount earmuffs come with Soft-Seal™ cushions.  The T-5000 super-tough visor carrier can be raised and lowered to three detent positions, seals off at hardhat brim for falling particle protection and the molded steel mesh face screen designed for superior impact and temperature resistance. Epoxy coated for glare and corrosion resistance. All components meet or exceed ANSI requirements. Fully dielectric fiberglass mesh screen available:  Woodsman model 6030, NRR=24.
For more product info, see:
http://www.tascocorp.com/tasco_t9000_rachet_headgear.html