Fall Protection Equipment - Lanyards
  Public Works Supply offers a wide variety of Lanyards. You can browse our suppliers and their many products listed below.
Please contact us at your earliest convenience for ordering assistance.
Back to Fall Protection Equipment for other products.
 
 

   Restraint - Work Positioning Lanyards

 
 
10072499

Restraint lanyards are primarily used for travel restriction (to restrain a worker from reaching a fall hazard) and work positioning (stabilizing a worker at an elevated location) applications.

 

 
  Click here to view Workman Fall Protection PDF and Workman Spec Sheet PDF.  
 
SNL3278106LS Rope Restraint Lanyard
SNL3248404LS Rope Restraint Lanyard
505063 Rope Restraint Lanyard
 
     
SNYR537DH306

Sure Grab Positioning Lanyard connects the user's body harness or waistbelt to a stationary or mobile anchorage/anchorage connector for work restriction and work positioning.
 
 
 
1232354
1/2" polyester web positioning lanyard, self locking snap hooks at each end x 6 ft. length.  
 
 
1231106
1" polyester web positioning lanyard, self locking snap hooks at each end x 6 ft. length.  
 
 
10056762 and 10056763
FP5K Carabiner and Monster Edge Webbing. Available in both single and twin-leg configurations.  
 
     Rebar Assemblies  
 
 
SCH3187511
Designed for work positioning applications such as tying rebar or constructing concrete forms.  
 
 
10044811
Rebar Chain assembly GL3100 snaphook with 2.25" Gate.  
 
 
10072498
Designed for work positioning applications such as tying rebar or constructing concrete forms.  
 
 
5920051
Twist link chain rebar lanyard for restraint and positioning. Use these positioning and restraint lanyards while performing such tasks as rebar tying or constructing of wall-forms. Like all positioning and restraint lanyards, they should only be used in applications that limit the free fall to two feet or less.  
 
     Shock Absorbing Lanyards  
 
 
10088065
Available in single or twin-leg configuration.  
 
10088067
 
10047084
FP5K Tie-Back Shock-Absorbing Lanyard.  
 
 
10088246
Thermatek Shock-Absorbing Lanyards are designed for high-heat applications.  
 
10045938
Twin Leg Lanyard with Large Hooks, typically used for ladder climbing..  
 
10088067
Diamond Shock-Absorbing Lanyards and Expanyards.  
 
913SS
Miller StretchStop Lanyard combines the integral SofStop Shock Absorber with a unique stretchable lanyard design.  
  Click here to see Critical Link Lanyards PDF.  
 
8798RSS
Miller StretchStop Lanyard with Two Legs and locking snap hook and locking rebar hooks.  
  Click here to see Stretch Stop Lanyard Family PDF.  
 
216M
Manyard II Stretchable Shock-Absorbing Lanyard, contracts 6' to 4'.  
  Click here to see the Miller Catalog PDF.  
 
231M
Manyard II Stretchable Shock-Absorbing Lanyards, Twin Legs, Locking snap hook, locking rebar hooks, Warning flag and Red core wear indicator.  
 
913B
BackBiter Tie-Back All in one SofStop Shock Absorbent Lanyard with 5K Snap Hook. Heavy-duty polyester webbing and Cordura nylon webbing with five times more abrasion resistance.  
 
8798BD
BackBiter Tie-Back Lanyard, Twin Leg Locking 5K snap hooks. The first snap hook with a 5,000 lb gate load capacity from any angle. Blue webbing has greater chemical resistance.  
 
1245006
Force 2 Shock Absorbing Lanyard. For use when there is no overhead anchorage and the only option is to tie off at your feet.  
 
1244306
ShockWave2™ Shock Absorbing Lanyard. ShockWave 2™ incorporates a unique inner core that immediately begins to extend and absorb energy during a fall, limiting arresting forces to no more than 900 lbs.  
  Click here to view Stop Lanyards PDF.  
 
1244412
ShockWave2™ shock absorbing lanyards are stretchable for complete freedom of movement. This twin-leg model allows you to keep one leg attached to the anchorage while the other leg is always ready to be hooked to the next anchorage.  
  Click here to view Supplemental Instructions PDF.  
 
1244650
The ShockWave2™ Tie-Back is available in single or double leg 100% tie-off styles for added job site flexibility. Both styles are i-Safe™ enabled and meet OSHA and the stringent ANSI Z359.1 2007 standard. A unique impact indicator provides the user with visual proof the lanyard has been involved in a fall and must be removed from service.  
  Click here to view Stretchable Shockwave PDF.  
 
1241906
The WrapBax2 ™ is specifically designed for tie-back use - eliminates the need for a separate anchorage connector, reduces inventory and cost, simplifies inspections and worker training, and improves compliance.  
  Click here to view WrapBax Lanyard PDF.  
 
1240006
EZStop® II shock absorbing lanyards are designed for versatility and are available in many variations. There is certain to be a model that will meet your fall arrest requirements from this popular product line. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.  
 
1240406
EZStop® II 100% Tie-Off Shock Absorbing Lanyard. 1" polyester webbing for durability and longevity. Twin-leg 100% tie-off style helps you remain connected at all times.  
 
1241460
EZ Stop® Retrax™ is the world's first retractable shock absorbing lanyard. Stays close to the body, reducing trip falls, dragging and snagging. Unique spring technology retracts and expands from 2 1/2 to 6 feet for complete freedom of movement, added productivity and ultimate safety.  
 
1241480
EZ Stop® Retrax™ is the world's first retractable shock absorbing lanyard. Stays close to the body, reducing trip falls, dragging and snagging. Unique spring technology retracts and expands from 2 1/2 to 6 feet for complete freedom of movement, added productivity and ultimate safety. Adjustable retraction length allows the user to limit the retraction at any interval between 2 1/2 and 6 feet for more flexibililty in applications.  
     
 
Home    About Us     Customer Service    Contact Us     Location   Our Customers   Resources   Media    Site Map